1
Phone in pocket
No app to open for daily rides. Pair once by Bluetooth and the system recognizes your phone automatically.
EasyRide for motorcycles in Thailand
Your phone IS the key. Stop digging through your pockets. Flip the killswitch. Just ride.
Keep your phone in your pocket. Sit down. Flip the killswitch — and you're off. While everyone's digging for keys — you're already riding. Won't start without you.
EasyRide motorcycle kit
Best for standard-key motorcycles without factory keyless fob. For GPX 250, Honda from Phantom to VFR1200, Kawasaki, Yamaha, Triumph and another brand.
0times taking the key out before every ride
30-60minutes typical installation
2 yearswarranty on the EasyRide unit
Phone nearbyAuthorized
IgnitionFlip killswitch
Engine startPush starter button
BackupPIN code
Old keyStill works
The small daily annoyance that happens 20 times a week.
Gloves, raincoat, delivery bag, phone mount, helmet, pockets. A motorcycle key is tiny, but it keeps stealing attention.
Why riders buy it
Tired of digging through pockets looking for your key, afraid of forgetting it at home or, worse, losing it before a long-awaited ride?
It removes the key habit, not the protection. EasyRide keeps the factory ignition lock usable and adds one modern layer: automatic phone authorization.
2
Personal PIN backup
If the phone is dead or lost, enter your 3-digit PIN using the starter button and ride.
3
Rain-ready sealed unit
IP68 housing is prepared for Thai rain, washing and wet parking conditions.
4
Very low battery use
Designed for normal motorcycle parking without turning convenience into a battery problem.
Came. Flipped. Started. Rode.
The interface is the motorcycle's own killswitch and starter button. That is why it feels natural after the first ride.
Daily routine
The whole ride starts in seconds.
1
Sit on the motorcycle
EasyRide wakes up and recognizes the paired phone nearby.
2
Flip the killswitch
Ignition turns on. No keys to search for, unclip, or pull from your pocket. Forget them for good.
3
Start as usual
Press the starter button. If you ride away without the phone, the motorcycle warns you but will not turn off while riding.
4
Park and walk away
Switch off by turning killswitch off. Without your phone or PIN, EasyRide will not authorize a start.
Compatibility
Made for popular motorcycles in Thailand.
One of the most useful tuning upgrades for a motorcycle: invisible, practical, and felt every single ride. EasyRide is for standard-key 12V motorcycles without a factory keyless fob or immobilizer.
GPX Twin, Legend, GentlemanHonda PhantomHonda CMX500Honda RebelHonda VFR1200Honda ShadowKawasaki VulcanYamaha XV1700Yamaha VSTARTriumph Bonneville, T100, Thruxton, ScramblerRoyal Enfield Interceptor 650, Meteor 350Other standard (no immobilizer) key motorcycles
Choose it for a standard ignition motorcycle.
The listed models are the easiest fit. For another motorcycle, the right question is simple: does it use a normal ignition key (no chip immobilizer of fob)? Then YES. If unsure, ask your mechanic before ordering.
- +Works with Android and iOS phones that support Bluetooth Low Energy.
- +Best for motorcycles without factory keyless/keyfob.
- +The original ignition key remains usable after installation.
FAQ
Questions riders ask before install EasyRide keyless.
Tap a question to open the answer. The most purchase-critical questions come first.
Can I use the old key after installation?
Do I need to open an app every time?
What is included in the kit?
What if my phone is dead, broken or lost?
Will it stop the motorcycle while riding?
Will it fit my motorcycle?
Which phones work with EasyRide?
How do I pair my phone?
What if I cannot find EasyRide in Bluetooth?
Will it drain the motorcycle battery?
What about rain and washing?
How long does installation take?
Can two phones be connected?
What if I lose the instruction and PIN?
Where are the instructions?
What is the warranty?
Installation
Installed by a mechanic or careful DIY.
If you can connect wires, know your positive from negative, and have a screwdriver, wire cutters and tape — you can install it yourself in an hour.
Place the unit
Place it under the seat, angled edge facing up. No metal between the block and the rider — it needs a clear path to your phone.
Connect motorcycle circuits - only 5 wires.
+battery, ignition, killswitch, horn and ground are connected according to the motorcycle wiring.
Pair the phone
Find EasyRide-XXXXXX in Bluetooth settings and enter the 6-digit pairing code from the instruction.
Test PIN backup
Make sure phone start, ignition off, and emergency PIN start all work before final assembly.
How to connect
Installation schematic for popular Honda models
Select your motorcycle model and follow the wire color coding on the diagram for a safe installation.
Ready to ride without a key?
Order EasyRide and make your motorcycle feel modern every day.
EasyRide motorcycle kit price: . Two-year warranty. Something wrong? Just send the unit back — we'll replace it, no questions asked. Changed your mind? 30-day returns.